PartsTable
Technical Data Sheet
Download PDF

11589649 — CLIP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11589649: CLIP,RETAINING.

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.116 INCHES NOMINAL IN, material: STEEL COMP 1045, overall_height: 0.200 INCHES NOMINAL IN, stock_diameter: 0.125 INCHES NOMINAL IN, style_designator: PIN, casehardening_indicator: NOT CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-880-8182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11589649
NSN: 5340-00-880-8182
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width0.116 INCHES NOMINAL IN
materialSTEEL COMP 1045
overall_height0.200 INCHES NOMINAL IN
stock_diameter0.125 INCHES NOMINAL IN
style_designatorPIN
casehardening_indicatorNOT CASEHARDENED
material_hardness_rating42.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM
material_document_and_classificationAISI 1045 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-880-8182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11589649 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL HARDNESS RATING: 42.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: PIN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 1045 ASSN STD SINGLE MATERIAL RESPONSE
•
STOCK DIAMETER: 0.125 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
WIDTH: 0.116 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1045
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.200 INCHES NOMINAL IN
MATERIAL HARDNESS RATING42.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORPIN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 1045 ASSN STD SINGLE MATERIAL RESPONSE
STOCK DIAMETER0.125 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
WIDTH0.116 INCHES NOMINAL IN
MATERIALSTEEL COMP 1045
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
5340008808182Reference document
Same NSN cross-reference
Reference document — Secondary reference
C2601-045-27Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 11589649?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11589649?
11589649 is a CLIP,RETAINING.
What parts can replace 11589649?
There are 2 known substitutes for 11589649: 5340008808182, C2601-045-27. Substitute compatibility should be verified for your specific system.
What is the NSN for 11589649?
11589649 is cataloged in the U.S. Government catalog under NSN 5340-00-880-8182. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11589649