PartsTable
Technical Data Sheet
Download PDF

11586412 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11586412: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, arch_radius: 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, mounting_pad: NOT INCLUDED, overall_width: 0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, overall_length: 0.560 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN, material_thickness: 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-097-4880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11586412
NSN: 5340-01-097-4880
FSC: 5340 — Hardware, Commercial
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
arch_radius0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
mounting_padNOT INCLUDED
overall_width0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
overall_length0.560 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
style_designatorJ
material_thickness0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
mounting_hole_size0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
distance_between_center_of_mounting_hole_and_arch_end0.460 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NSN5340-01-097-4880
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11586412 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN CENTER OF MOUNTING HOLE AND ARCH END: 0.460 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
MOUNTING HOLE SIZE: 0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: J
•
ARCH RADIUS: 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
DISTANCE BETWEEN CENTER OF MOUNTING HOLE AND ARCH END0.460 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
MOUNTING HOLE SIZE0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORJ
OVERALL LENGTH0.560 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
OVERALL WIDTH0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
ARCH RADIUS0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
MATERIAL THICKNESS0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
CUSHIONNOT INCLUDED
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 11586412?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11586412?
11586412 is a STRAP,RETAINING.
What is the NSN for 11586412?
11586412 is cataloged in the U.S. Government catalog under NSN 5340-01-097-4880. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11586412

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.