PartsTable / COMPONENT / 115702ADX
115702ADX
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_diameter: 0.187 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN, overall_height: 0.500 INCHES NOMINAL IN, style_designator: FLAT TOP COUNTERBORED, first_counterbore_depth: 0.250 INCHES NOMINAL IN, material_hardness_rating: 70.0 DUROMETER NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-301-5955, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
115702ADX
NSN: 5340-01-301-5955 FSC: 5340 CAGE: 1VN02 — AIRDALE EXPRESS LLC DIV AIRDALE EXPRESS (USA)
SPECIFICATIONS
material RUBBER hole_diameter 0.187 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN overall_height 0.500 INCHES NOMINAL IN style_designator FLAT TOP COUNTERBORED first_counterbore_depth 0.250 INCHES NOMINAL IN material_hardness_rating 70.0 DUROMETER NOMINAL first_counterbore_diameter 0.375 INCHES NOMINAL IN outside/top_flange_diameter 1.000 INCHES NOMINAL IN NSN 5340-01-301-5955
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 115702ADX
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: FLAT TOP COUNTERBORED
• OUTSIDE/TOP FLANGE DIAMETER: 1.000 INCHES NOMINAL IN
• HOLE DIAMETER: 0.187 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
• MATERIAL HARDNESS RATING: 70.0 DUROMETER NOMINAL
• FIRST COUNTERBORE DEPTH: 0.250 INCHES NOMINAL IN
• FIRST COUNTERBORE DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR FLAT TOP COUNTERBORED OUTSIDE/TOP FLANGE DIAMETER 1.000 INCHES NOMINAL IN HOLE DIAMETER 0.187 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN MATERIAL HARDNESS RATING 70.0 DUROMETER NOMINAL OVERALL HEIGHT 0.500 INCHES NOMINAL IN FIRST COUNTERBORE DEPTH 0.250 INCHES NOMINAL IN MATERIAL RUBBER FIRST COUNTERBORE DIAMETER 0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
115-702 Upgraded Successor successor cross-reference
successor
03-1785 Upgraded Successor successor cross-reference
successor
52145 Interchangeable interchangeable cross-reference
interchangeable
52145-1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 115702ADX?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 115702ADX?
115702ADX is a BUMPER.
What parts can replace 115702ADX?
There are 4 known substitutes for 115702ADX: 115-702, 03-1785, 52145 and 1 more. Substitute compatibility should be verified for your specific system.
Is 115702ADX still available?
115702ADX is currently cancelled.
Request a Quote — 115702ADX