PartsTable
Technical Data Sheet
Download PDF

1155A — FILTER,RADIO FREQUENCY INTERFERE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1155A: FILTER,RADIO FREQUENCY INTERFERE.

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include width: 0.265 INCHES NOMINAL IN, height: 0.196 INCHES NOMINAL IN, length: 0.390 INCHES NOMINAL IN, material: STEEL COMP 316, hole_diameter: 0.107 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN, special_features: NYLON INSERT INTEGRAL PART. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-874-7450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1155A
NSN: 5340-00-874-7450
NIINs: 008747450, 013108442
FSC: 5340 — Hardware, Commercial
CAGE: 18544 — TELLUROMETER-USA DIV OF PLESSEY INC (USA)
SPECIFICATIONS
width0.265 INCHES NOMINAL IN
height0.196 INCHES NOMINAL IN
length0.390 INCHES NOMINAL IN
materialSTEEL COMP 316
hole_diameter0.107 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
special_featuresNYLON INSERT INTEGRAL PART
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-874-7450
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1155A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.390 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.196 INCHES NOMINAL IN
•
WIDTH: 0.265 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 316
•
HOLE DIAMETER: 0.107 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.390 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE
HEIGHT0.196 INCHES NOMINAL IN
SPECIAL FEATURESNYLON INSERT INTEGRAL PART
WIDTH0.265 INCHES NOMINAL IN
MATERIALSTEEL COMP 316
HOLE DIAMETER0.107 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
S30024-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
918337-9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
115054-337Reference document
Same NSN cross-reference
Reference document — Secondary reference
E617312-17Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
11743643Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1155A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1155A?
1155A is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1155A?
There are 5 known substitutes for 1155A: S30024-10, 918337-9, 115054-337 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1155A?
1155A is cataloged in the U.S. Government catalog under NSN 5340-00-874-7450. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1155A