PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1153DP
1153DP ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN, overall_width: 0.4275 INCHES MINIMUM AND 0.4475 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: UNGROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-114-9628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1153DP
NSN: 3110-00-114-9628
FSC: 3110
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN
overall_width0.4275 INCHES MINIMUM AND 0.4475 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishUNGROUND
special_featuresINNER OR OUTER RINGS COMPOSED OF TWO OR MORE PARTS
style_designatorSPLIT OUTER RING WITH BAND AND SOLID INNER RING; NON-SEPARABLE
overall_outside_diameter1.5000 INCHES MINIMUM AND 1.5050 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-114-9628
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1153DP · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT OUTER RING WITH BAND AND SOLID INNER RING; NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 1.5000 INCHES MINIMUM AND 1.5050 INCHES MAXIMUM IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
BORE DIAMETER: 0.5000 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.4275 INCHES MINIMUM AND 0.4475 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT OUTER RING WITH BAND AND SOLID INNER RING; NON-SEPARABLE
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER1.5000 INCHES MINIMUM AND 1.5050 INCHES MAXIMUM IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
BORE DIAMETER0.5000 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN
SURFACE FINISHUNGROUND
SPECIAL FEATURESINNER OR OUTER RINGS COMPOSED OF TWO OR MORE PARTS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
6003-45Interchangeable
interchangeable cross-reference
interchangeable
40031Interchangeable
interchangeable cross-reference
interchangeable
92358Interchangeable
interchangeable cross-reference
interchangeable
124735Interchangeable
interchangeable cross-reference
interchangeable
382M5Interchangeable
interchangeable cross-reference
interchangeable
A2464Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1153DP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1153DP?
1153DP is a BEARING,BALL,ANNULAR.
What parts can replace 1153DP?
There are 17 known substitutes for 1153DP: 6003-45, 40031, 92358 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1153DP?
1153DP is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-114-9628. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1153DP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026