PartsTable
Technical Data Sheet
PartsTable / MRO / 11533
11533 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The HOUSING,PROTECTIVE,CAMERA is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, body_width: 3.005 INCHES NOMINAL IN, point_type: CONVENTIONAL, shaft_type: ROUND SINGLE ACTUATOR, body_height: 2.870 INCHES NOMINAL IN, body_length: 3.940 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-032-6965, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11533
NSN: 5310-00-032-6965
FSC: 5310
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
body_width3.005 INCHES NOMINAL IN
point_typeCONVENTIONAL
shaft_typeROUND SINGLE ACTUATOR
body_height2.870 INCHES NOMINAL IN
body_length3.940 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length4.750 INCHES NOMINAL IN
shaft_length1.875 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
hole_diameter0.931 INCHES NOMINAL IN
NSN5310-00-032-6965
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11533 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.019 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.931 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPLIT
•
SURFACE TREATMENT: CADMIUM OVERALL
•
OUTSIDE DIAMETER: 1.166 INCHES NOMINAL IN
•
DISTANCE ACROSS SPLIT OPENING: 0.047 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.019 INCHES NOMINAL IN
HOLE DIAMETER0.931 INCHES NOMINAL IN
STYLE DESIGNATORSPLIT
SURFACE TREATMENTCADMIUM OVERALL
OUTSIDE DIAMETER1.166 INCHES NOMINAL IN
DISTANCE ACROSS SPLIT OPENING0.047 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
601220Interchangeable
interchangeable cross-reference
interchangeable
11533Interchangeable
interchangeable cross-reference
interchangeable
243095P2Interchangeable
interchangeable cross-reference
interchangeable
120 33/64Interchangeable
interchangeable cross-reference
interchangeable
2510 33/64Interchangeable
interchangeable cross-reference
interchangeable
C08840Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11533?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11533?
11533 is a HOUSING,PROTECTIVE,CAMERA. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11533?
There are 12 known substitutes for 11533: 601220, 11533, 243095P2 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11533?
11533 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-032-6965. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11533

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026