PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 115264
115264 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: OVAL COUNTERSUNK, head_diameter: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, features_provided: CASEHARDENED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-011-5264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
115264
NSN: 5305-00-011-5264
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleOVAL COUNTERSUNK
head_diameter0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
fastener_length0.750 INCHES NOMINAL IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
features_providedCASEHARDENED
internal_drive_styleSLOT
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.190 INCHES IN
NSN5305-00-011-5264
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 115264 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: SLOT
•
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
FEATURES PROVIDED: CASEHARDENED
•
MATERIAL: STEEL OVERALL
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: OVAL COUNTERSUNK
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLESLOT
HEAD DIAMETER0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
MATERIALSTEEL OVERALL
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEOVAL COUNTERSUNK
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
FASTENER LENGTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
504365Interchangeable
interchangeable cross-reference
interchangeable
J246Interchangeable
interchangeable cross-reference
interchangeable
MS39184-3Interchangeable
interchangeable cross-reference
interchangeable
SMB148310-3Interchangeable
interchangeable cross-reference
interchangeable
52953Interchangeable
interchangeable cross-reference
interchangeable
65C35483-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 115264?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 115264?
115264 is a SCREW,TAPPING.
What parts can replace 115264?
There are 10 known substitutes for 115264: 504365, J246, MS39184-3 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 115264?
115264 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-011-5264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 115264

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026