PartsTable
Technical Data Sheet
Download PDF

1151DP — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1151DP: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.6250 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM IN, overall_width: 0.4275 INCHES MINIMUM AND 0.4475 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: UNGROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-0915, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1151DP
NSN: 3110-00-198-0915
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.6250 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM IN
overall_width0.4275 INCHES MINIMUM AND 0.4475 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishUNGROUND
shield_quantity1
style_designatorSPLIT OUTER RING WITH BAND AND SOLID INNER RING; NON-SEPARABLE
lubrication_materialLUBRICANT
overall_outside_diameter1.3750 INCHES MINIMUM AND 1.3760 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-198-0915
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1151DP · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: LUBRICANT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: UNGROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: SPLIT OUTER RING WITH BAND AND SOLID INNER RING; NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.3750 INCHES MINIMUM AND 1.3760 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALLUBRICANT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHUNGROUND
SHIELD QUANTITY1
STYLE DESIGNATORSPLIT OUTER RING WITH BAND AND SOLID INNER RING; NON-SEPARABLE
OVERALL WIDTH0.4275 INCHES MINIMUM AND 0.4475 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.3750 INCHES MINIMUM AND 1.3760 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
BORE DIAMETER0.6250 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
476Reference document
Same NSN cross-reference
Reference document — Secondary reference
G4044Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1151DP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1151DP?
1151DP is a BEARING,BALL,ANNULAR.
What parts can replace 1151DP?
There are 2 known substitutes for 1151DP: 476, G4044. Substitute compatibility should be verified for your specific system.
What is the NSN for 1151DP?
1151DP is cataloged in the U.S. Government catalog under NSN 3110-00-198-0915. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1151DP