PartsTable
Technical Data Sheet
Download PDF

11500928 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11500928: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL PROPERTY CLASS 8.8 OVERALL, head_style: HEXAGON, head_height: 7.0 MILLIMETERS NOMINAL MM, thread_length: 17.0 MILLIMETERS MINIMUM AND 20.0 MILLIMETERS MAXIMUM MM, fastener_length: 20.00 MILLIMETERS NOMINAL MM, hardness_rating: 27.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-145-1196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11500928
NSN: 5305-01-145-1196
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL PROPERTY CLASS 8.8 OVERALL
head_styleHEXAGON
head_height7.0 MILLIMETERS NOMINAL MM
thread_length17.0 MILLIMETERS MINIMUM AND 20.0 MILLIMETERS MAXIMUM MM
fastener_length20.00 MILLIMETERS NOMINAL MM
hardness_rating27.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
width_between_flats17.0 MILLIMETERS NOMINAL MM
nominal_thread_diameter10.0 MILLIMETERS MM
minimum_tensile_strength128000 POUNDS PER SQUARE INCH LBS
thread_series_designatorM
thread_pitch_in_millimeters1.5
NSN5305-01-145-1196
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11500928 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 7.0 MILLIMETERS NOMINAL MM
•
FASTENER LENGTH: 20.00 MILLIMETERS NOMINAL MM
•
THREAD PITCH IN MILLIMETERS: 1.5
•
THREAD LENGTH: 17.0 MILLIMETERS MINIMUM AND 20.0 MILLIMETERS MAXIMUM MM
•
HARDNESS RATING: 27.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: DIN933 8.8 FSCM 21969 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 10.0 MILLIMETERS MM
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT7.0 MILLIMETERS NOMINAL MM
FASTENER LENGTH20.00 MILLIMETERS NOMINAL MM
THREAD PITCH IN MILLIMETERS1.5
THREAD LENGTH17.0 MILLIMETERS MINIMUM AND 20.0 MILLIMETERS MAXIMUM MM
HARDNESS RATING27.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONDIN933 8.8 FSCM 21969 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER10.0 MILLIMETERS MM
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS17.0 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 5
M10-1.5-20 DIN9 33STReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
DIN933STM10X1-5X20Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
DIN933 M10X1.5X20-8.8Reference document
Same NSN cross-reference
Reference document — Secondary reference
DIN EN ISO 4017Reference document
Same NSN cross-reference
Reference document — Secondary reference
423-520Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11500928?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11500928?
11500928 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 11500928?
There are 5 known substitutes for 11500928: M10-1.5-20 DIN9 33ST, DIN933STM10X1-5X20, DIN933 M10X1.5X20-8.8 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11500928?
11500928 is cataloged in the U.S. Government catalog under NSN 5305-01-145-1196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11500928

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.