PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 115002-002
115002-002 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, nut_style: HEXAGON, nut_height: 0.0937 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-138-6624, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
115002-002
NSN: 5310-00-138-6624
FSC: 5310
CAGE: 91417 — L3HARRIS TECHNOLOGIES, INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
nut_styleHEXAGON
nut_height0.0937 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.250 INCHES NOMINAL IN
nominal_thread_size0.112 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch40
material_document_and_classificationMIL-P-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-138-6624
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 115002-002 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
BEARING SURFACE TYPE: CHAMFERED
•
THREAD QUANTITY PER INCH: 40
•
NUT STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
NUT HEIGHT: 0.0937 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.112 INCHES IN
BEARING SURFACE TYPECHAMFERED
THREAD QUANTITY PER INCH40
NUT STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT0.0937 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD CLASS2B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
14U1017PCDA6586Interchangeable
interchangeable cross-reference
interchangeable
DA6586Interchangeable
interchangeable cross-reference
interchangeable
6586Interchangeable
interchangeable cross-reference
interchangeable
4432Interchangeable
interchangeable cross-reference
interchangeable
AT7226SCInterchangeable
interchangeable cross-reference
interchangeable
7586Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 115002-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 115002-002?
115002-002 is a NUT,PLAIN,HEXAGON.
What parts can replace 115002-002?
There are 13 known substitutes for 115002-002: 14U1017PCDA6586, DA6586, 6586 and 10 more. Substitute compatibility should be verified for your specific system.
Is 115002-002 still available?
115002-002 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 115002-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026