PartsTable
Technical Data Sheet
Download PDF

11500-090 — SWITCH ASSEMBLY

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11500-090: SWITCH ASSEMBLY.

The SWITCH ASSEMBLY is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_width: 4.880 INCHES MINIMUM AND 4.940 INCHES MAXIMUM IN, aperture_width: 4.180 INCHES MINIMUM AND 4.240 INCHES MAXIMUM IN, overall_length: 7.310 INCHES MINIMUM AND 7.350 INCHES MAXIMUM IN, aperture_length: 6.550 INCHES MINIMUM AND 6.610 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-037-2241, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11500-090
NSN: 5330-01-037-2241
NIINs: 010372241, 011637613
FSC: 5330 — Packing and Gasket Materials
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_width4.880 INCHES MINIMUM AND 4.940 INCHES MAXIMUM IN
aperture_width4.180 INCHES MINIMUM AND 4.240 INCHES MAXIMUM IN
overall_length7.310 INCHES MINIMUM AND 7.350 INCHES MAXIMUM IN
aperture_length6.550 INCHES MINIMUM AND 6.610 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
cross-sectional_thickness0.350 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-037-2241
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11500-090 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.350 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 4.180 INCHES MINIMUM AND 4.240 INCHES MAXIMUM IN
•
APERTURE LENGTH: 6.550 INCHES MINIMUM AND 6.610 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.350 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH7.310 INCHES MINIMUM AND 7.350 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.880 INCHES MINIMUM AND 4.940 INCHES MAXIMUM IN
APERTURE WIDTH4.180 INCHES MINIMUM AND 4.240 INCHES MAXIMUM IN
APERTURE LENGTH6.550 INCHES MINIMUM AND 6.610 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
457-5668Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11500-090?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11500-090?
11500-090 is a SWITCH ASSEMBLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11500-090?
There is 1 known substitute for 11500-090: 457-5668. Substitute compatibility should be verified for your specific system.
What is the NSN for 11500-090?
11500-090 is cataloged in the U.S. Government catalog under NSN 5330-01-037-2241. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11500-090