PartsTable
Technical Data Sheet
PartsTable / MRO / 1150-9
1150-9 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BAR,SELECTOR,TELETYPEWRITER is a the manufacturer industrial component. Key specifications include end_item_identification: TT-173A/TG A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-183-5759, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1150-9
NSN: 3110-00-183-5759
FSC: 3110
CAGE: 06650 — BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES (USA)
SPECIFICATIONS
end_item_identificationTT-173A/TG A
NSN3110-00-183-5759
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1150-9 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: OIL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
LUBRICATION MATERIALOIL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.5
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALOIL
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
49709Interchangeable
interchangeable cross-reference
interchangeable
C08674Interchangeable
interchangeable cross-reference
interchangeable
2510 9/64Interchangeable
interchangeable cross-reference
interchangeable
55A6334CHANGE12ITEM6Interchangeable
interchangeable cross-reference
interchangeable
1150-9Interchangeable
interchangeable cross-reference
interchangeable
6-0386PC95Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1150-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1150-9?
1150-9 is a BAR,SELECTOR,TELETYPEWRITER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1150-9?
There are 16 known substitutes for 1150-9: 49709, C08674, 2510 9/64 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1150-9?
1150-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-183-5759. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1150-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026