PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1150-10A
1150-10A ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL, features_provided: CASEHARDENED, pin_overall_length: 0.969 INCHES NOMINAL IN, pin_overall_diameter: 0.1858 INCHES MINIMUM AND 0.1860 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-298-3503, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1150-10A
NSN: 5315-00-298-3503
FSC: 5315
CAGE: 29177 — FREDERICK A L INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
hardness_rating40.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL
features_providedCASEHARDENED
pin_overall_length0.969 INCHES NOMINAL IN
pin_overall_diameter0.1858 INCHES MINIMUM AND 0.1860 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-298-3503
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1150-10A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.969 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL DIAMETER: 0.1858 INCHES MINIMUM AND 0.1860 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
FEATURES PROVIDED: CASEHARDENED
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.969 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
PIN OVERALL DIAMETER0.1858 INCHES MINIMUM AND 0.1860 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
FEATURES PROVIDEDCASEHARDENED
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
115-010Interchangeable
interchangeable cross-reference
interchangeable
HF15-292-100HMInterchangeable
interchangeable cross-reference
interchangeable
45363-2Interchangeable
interchangeable cross-reference
interchangeable
BC1-0625Interchangeable
interchangeable cross-reference
interchangeable
C62-4Interchangeable
interchangeable cross-reference
interchangeable
2558258-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1150-10A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1150-10A?
1150-10A is a PIN,STRAIGHT,HEADLESS.
What parts can replace 1150-10A?
There are 6 known substitutes for 1150-10A: 115-010, HF15-292-100HM, 45363-2 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1150-10A?
1150-10A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-298-3503. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1150-10A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026