PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 115-9-2
115-9-2 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Single-sided cable for comfortable wearing with no tangles<br>- Comfortable and optimal positioning thanks to the flexible microphone arm<br>- Cable remote control for convenient and continuous sound control<br>- With circumaural earpieces for undisturbed listening and game or telephone sessions which last for hours<br>- Extra-long cable This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-257-0038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
115-9-2
NSN: 5340-00-257-0038
FSC: 5340
CAGE: 88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.047 INCHES NOMINAL IN
loop_inside_diameter0.125 INCHES NOMINAL IN
end_item_identificationSATCOM AUTO INFLATION UNIT GROUP
distance_from_loop_center_to_tongue_end0.610 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyTOOL BAG, GEN 3 POPULATED
center_to_center_distance_between_loop_and_mounting_hole0.360 INCHES NOMINAL IN
NSN5340-00-257-0038
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 115-9-2 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.125 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.610 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.360 INCHES NOMINAL IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.047 INCHES NOMINAL IN
•
MATERIAL: PLASTIC BAND
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.125 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.610 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.360 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
MATERIAL THICKNESS0.047 INCHES NOMINAL IN
MATERIALPLASTIC BAND
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
46296C1470Upgraded Successor
successor cross-reference
successor
831Upgraded Successor
successor cross-reference
successor
D4587-1-26Upgraded Successor
successor cross-reference
successor
2Upgraded Successor
successor cross-reference
successor
2-WBUpgraded Successor
successor cross-reference
successor
68372Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 115-9-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 115-9-2?
115-9-2 is a RECTIFIER,SEMICONDUCTOR DEVICE,U manufactured by Hama.
What parts can replace 115-9-2?
There are 19 known substitutes for 115-9-2: 46296C1470, 831, D4587-1-26 and 16 more. Substitute compatibility should be verified for your specific system.
Is 115-9-2 still available?
115-9-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 115-9-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026