Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-664-8163, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
115-10-13
NSN:5340-00-664-8163 FSC:5340 CAGE:88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
diameter
0.204 INCHES NOMINAL IN
material
RUBBER CHLOROPRENE CLASS CR CUSHION
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
CHROMATE BAND
material_thickness
0.050 INCHES NOMINAL IN
loop_inside_diameter
0.673 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN
end_item_identification
MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
cushioning_environmental_protection
WEATHER RESISTANT
material_document_and_classification
AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end
1.032 INCHES NOMINAL IN
NSN
5340-00-664-8163
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BAND
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHION
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.799 INCHES MINIMUM AND 0.829 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.673 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 115-10-13?
115-10-13 is a CLAMP,LOOP.
What parts can replace 115-10-13?
There are 25 known substitutes for 115-10-13: MIL-DTL-8603, TA1716WS4, MS21919WG4 and 22 more. Substitute compatibility should be verified for your specific system.
Is 115-10-13 still available?
115-10-13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.