PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114SS652-1
114SS652-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 8.620 INCHES NOMINAL IN, length: 9.880 INCHES NOMINAL IN, material: ALUMINUM ALLOY 7075, corner_radius: 0.560 INCHES NOMINAL IN, hole_diameter: 0.2502 INCHES MINIMUM AND 0.2533 INCHES MAXIMUM IN, body_thickness: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-875-1459, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114SS652-1
NSN: 5340-00-875-1459
FSC: 5340
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
width8.620 INCHES NOMINAL IN
length9.880 INCHES NOMINAL IN
materialALUMINUM ALLOY 7075
corner_radius0.560 INCHES NOMINAL IN
hole_diameter0.2502 INCHES MINIMUM AND 0.2533 INCHES MAXIMUM IN
body_thickness0.125 INCHES NOMINAL IN
special_featuresONE HOLE,0.190 IN. MIN,0.195 IN. MAX DIA,2.310 IN. FROM HOLE C TO END OF COVER ALONG LG,2.310 IN. FROM HOLE C TO END OF COVER ALONG W IN
surface_treatmentOXIDE FILM
fsc_application_dataFUSELAGE SECT.,ACFT
securing_device_typeTHREADED FASTENER
peripheral_shape_styleRECTANGLE, MULTI HOLES
hole_quantity_along_width14
NSN5340-00-875-1459
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114SS652-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 1.250 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 1.250 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 0.560 INCHES NOMINAL IN
•
WIDTH: 8.620 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
HOLE QUANTITY ALONG LENGTH: 12
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE BETWEEN HOLES ALONG LENGTH1.250 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH1.250 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.560 INCHES NOMINAL IN
SPECIAL FEATURESONE HOLE,0.190 IN. MIN,0.195 IN. MAX DIA,2.310 IN. FROM HOLE C TO END OF COVER ALONG LG,2.310 IN. FROM HOLE C TO END OF COVER ALONG W IN
WIDTH8.620 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
HOLE QUANTITY ALONG LENGTH12
PERIPHERAL SHAPE STYLERECTANGLE, MULTI HOLES
FSC APPLICATION DATAFUSELAGE SECT.,ACFT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
4074Interchangeable
interchangeable cross-reference
interchangeable
995-1A33R0JInterchangeable
interchangeable cross-reference
interchangeable
995-1A330HMInterchangeable
interchangeable cross-reference
interchangeable
95G3244Interchangeable
interchangeable cross-reference
interchangeable
DMS 81051BInterchangeable
interchangeable cross-reference
interchangeable
E121211Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114SS652-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114SS652-1?
114SS652-1 is a COVER,ACCESS.
What parts can replace 114SS652-1?
There are 20 known substitutes for 114SS652-1: 4074, 995-1A33R0J, 995-1A330HM and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 114SS652-1?
114SS652-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-875-1459. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114SS652-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026