PartsTable
Technical Data Sheet
Download PDF

114R3625-1 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

114R3625-1: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include radius: 1.084 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN, material: STEEL COMP XM-12 OVERALL, thread_class: 3A ROD CONNECTION A, tongue_width: 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN, thread_length: 2.300 INCHES MINIMUM AND 2.340 INCHES MAXIMUM ROD CONNECTION IN, thread_direction: LEFT-HAND ROD CONNECTION. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-176-0902, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114R3625-1
NSN: 5340-00-176-0902
FSC: 5340 — Hardware, Commercial
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
radius1.084 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN
materialSTEEL COMP XM-12 OVERALL
thread_class3A ROD CONNECTION A
tongue_width2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN
thread_length2.300 INCHES MINIMUM AND 2.340 INCHES MAXIMUM ROD CONNECTION IN
thread_directionLEFT-HAND ROD CONNECTION
tongue_thickness0.802 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
nominal_thread_size1.000 INCHES ROD CONNECTION IN
shank_overall_length7.260 INCHES MINIMUM AND 7.340 INCHES MAXIMUM IN
shank_outside_diameter0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
thread_series_designatorUNF ROD CONNECTION
securing_pin_hole_diameter0.178 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
NSN5340-00-176-0902
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114R3625-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE THICKNESS: 0.802 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
•
TONGUE WIDTH: 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.178 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
•
RADIUS: 1.084 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN
•
THREAD LENGTH: 2.300 INCHES MINIMUM AND 2.340 INCHES MAXIMUM ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: LEFT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 1.000 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
TONGUE THICKNESS0.802 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
TONGUE WIDTH2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.178 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
RADIUS1.084 INCHES MINIMUM AND 1.104 INCHES MAXIMUM IN
THREAD LENGTH2.300 INCHES MINIMUM AND 2.340 INCHES MAXIMUM ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5659 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONLEFT-HAND ROD CONNECTION
NOMINAL THREAD SIZE1.000 INCHES ROD CONNECTION IN
SHANK OUTSIDE DIAMETER0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
DISTANCE FROM END TO HOLE CENTER1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — critical (Q)
Ready to buy 114R3625-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114R3625-1?
114R3625-1 is a CONNECTOR,ROD END.
What is the NSN for 114R3625-1?
114R3625-1 is cataloged in the U.S. Government catalog under NSN 5340-00-176-0902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114R3625-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.