PartsTable
Technical Data Sheet
Download PDF

114R3425-2 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

114R3425-2: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, body_width: 0.875 INCHES NOMINAL IN, tongue_width: 2.188 INCHES NOMINAL IN, special_features: SHANK END SLOTTED 0.186 IN. W BY 1.190 IN.

LG; SHANK SHOULDER GROOVED 0.124 IN. W IN, tongue_thickness: 0.802 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN, shoulder_diameter: 0.800 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-074-9950, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114R3425-2
NSN: 5340-00-074-9950
FSC: 5340 — Hardware, Commercial
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
body_width0.875 INCHES NOMINAL IN
tongue_width2.188 INCHES NOMINAL IN
special_featuresSHANK END SLOTTED 0.186 IN. W BY 1.190 IN. LG; SHANK SHOULDER GROOVED 0.124 IN. W IN
tongue_thickness0.802 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
shoulder_diameter0.800 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
shank_overall_length5.960 INCHES NOMINAL IN
shank_outside_diameter0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
rod_connection_bore_depth4.500 INCHES NOMINAL IN
securing_pin_hole_diameter0.094 INCHES NOMINAL IN
rod_connection_bore_diameter0.380 INCHES NOMINAL IN
NSN5340-00-074-9950
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114R3425-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE THICKNESS: 0.802 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
•
TONGUE WIDTH: 2.188 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.094 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PV-F-5,THE BOEING CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
SHOULDER DIAMETER: 0.800 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
•
BODY WIDTH: 0.875 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SHANK OUTSIDE DIAMETER: 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TONGUE THICKNESS0.802 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
TONGUE WIDTH2.188 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.094 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONPV-F-5,THE BOEING CO MFR REF SINGLE TREATMENT RESPONSE OVERALL
SHOULDER DIAMETER0.800 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
BODY WIDTH0.875 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SHANK OUTSIDE DIAMETER0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
SPECIAL FEATURESSHANK END SLOTTED 0.186 IN. W BY 1.190 IN. LG; SHANK SHOULDER GROOVED 0.124 IN. W IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 114R3425-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114R3425-2?
114R3425-2 is a CONNECTOR,ROD END.
What is the NSN for 114R3425-2?
114R3425-2 is cataloged in the U.S. Government catalog under NSN 5340-00-074-9950. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114R3425-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.