PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114PS433-3
114PS433-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include special_features: OBLONG IN SHAPE, retainer_thickness: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-877-7545, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114PS433-3
NSN: 5330-00-877-7545
FSC: 5330
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
special_featuresOBLONG IN SHAPE
retainer_thickness0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
NSN5330-00-877-7545
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114PS433-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER THICKNESS: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESOBLONG IN SHAPE
RETAINER THICKNESS0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
4684Interchangeable
interchangeable cross-reference
interchangeable
212-010-762-001Interchangeable
interchangeable cross-reference
interchangeable
212-010-762-1Interchangeable
interchangeable cross-reference
interchangeable
T354Interchangeable
interchangeable cross-reference
interchangeable
1689-7003Interchangeable
interchangeable cross-reference
interchangeable
PHASER II SDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114PS433-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114PS433-3?
114PS433-3 is a PACKING WITH RETAINER.
What parts can replace 114PS433-3?
There are 6 known substitutes for 114PS433-3: 4684, 212-010-762-001, 212-010-762-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 114PS433-3?
114PS433-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-877-7545. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114PS433-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026