114P2031-1 — LEVER,REMOTE CONTROL

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

114P2031-1: LEVER,REMOTE CONTROL.

The LEVER,REMOTE CONTROL is a the manufacturer industrial component. Key specifications include overall_width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, major_diameter: 0.3969 INCHES MINIMUM AND 0.4029 INCHES MAXIMUM IN, minor_diameter: 0.3656 INCHES MINIMUM AND 0.3676 INCHES MAXIMUM IN, special_features: OFFSET HEIGHT: 0.275 IN. NOMINAL IN, surface_treatment: PASSIVATE, link_end_thickness: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 3040-00-895-9449, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

114P2031-1

NSN: 3040-00-895-9449
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

overall_width	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
major_diameter	0.3969 INCHES MINIMUM AND 0.4029 INCHES MAXIMUM IN
minor_diameter	0.3656 INCHES MINIMUM AND 0.3676 INCHES MAXIMUM IN
special_features	OFFSET HEIGHT: 0.275 IN. NOMINAL IN
surface_treatment	PASSIVATE
link_end_thickness	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
serration_quantity	24
shaft_end_thickness	0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
link_end_hole_diameter	0.2468 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
center_to_center_distance_between_link_and_shaft_holes	1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
NSN	3040-00-895-9449

COMPONENT DIAGRAM

KEY FEATURES

•

LINK END THICKNESS: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN

•

LINK END HOLE DIAMETER: 0.2468 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN

•

SHAFT END THICKNESS: 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN

•

CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN

•

SERRATION QUANTITY: 24

•

SURFACE TREATMENT: PASSIVATE

TECHNICAL CHARACTERISTICS

LINK END THICKNESS	0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
LINK END HOLE DIAMETER	0.2468 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
SHAFT END THICKNESS	0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
OVERALL WIDTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES	1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
SERRATION QUANTITY	24
SPECIAL FEATURES	OFFSET HEIGHT: 0.275 IN. NOMINAL IN
SURFACE TREATMENT	PASSIVATE
MINOR DIAMETER	0.3656 INCHES MINIMUM AND 0.3676 INCHES MAXIMUM IN
MAJOR DIAMETER	0.3969 INCHES MINIMUM AND 0.4029 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 3040 — Miscellaneous Power Transmission Equipment

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3040-00-001-0046 3040-00-001-0047 3040-00-001-0048 3040-00-001-0068 3040-00-001-0077 3040-00-001-0078 3040-00-001-0089 3040-00-001-1224

SUBSTITUTES & CROSS-REFERENCES 1

114P2036-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)

Ready to buy 114P2031-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 114P2031-1?

114P2031-1 is a LEVER,REMOTE CONTROL.

What parts can replace 114P2031-1?

There is 1 known substitute for 114P2031-1: 114P2036-3. Substitute compatibility should be verified for your specific system.

What is the NSN for 114P2031-1?

114P2031-1 is cataloged in the U.S. Government catalog under NSN 3040-00-895-9449. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

114P2031-1 — LEVER,REMOTE CONTROL

Request a Quote — 114P2031-1