PartsTable
Technical Data Sheet
Download PDF

114L2462-1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

114L2462-1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.830 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN, overall_length: 1.830 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN, outside_corner_radius: 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, cross-sectional_thickness: 0.016 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-455-6178, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114L2462-1
NSN: 5330-00-455-6178
FSC: 5330 — Packing and Gasket Materials
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
hole_diameter0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.830 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN
overall_length1.830 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN
outside_corner_radius0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_length0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-455-6178
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114L2462-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH1.830 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.830 INCHES MINIMUM AND 1.850 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
HOLE DIAMETER0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 114L2462-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114L2462-1?
114L2462-1 is a GASKET.
What is the NSN for 114L2462-1?
114L2462-1 is cataloged in the U.S. Government catalog under NSN 5330-00-455-6178. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114L2462-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.