PartsTable
Technical Data Sheet
Download PDF

114H4008-1 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

114H4008-1: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: ROUND, nut_diameter: 2.670 INCHES MINIMUM AND 2.710 INCHES MAXIMUM IN, thread_class: 3B, nut_thickness: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-883-4456, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114H4008-1
NSN: 5310-00-883-4456
FSC: 5310 — Nuts and Washers
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleROUND
nut_diameter2.670 INCHES MINIMUM AND 2.710 INCHES MAXIMUM IN
thread_class3B
nut_thickness0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
thread_seriesUN
thread_directionRIGHT-HAND
drive_point_depth0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
drive_point_width0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
nominal_thread_size2.312 INCHES IN
drive_point_quantity4
drilled_hole_diameter0.046 INCHES NOMINAL IN
NSN5310-00-883-4456
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 114H4008-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
HOLE CONFIGURATION STYLE: CONFIGURATION J
•
THREAD PITCH DIAMETERS: +2.2719 TO 2.2773 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DRIVE POINT WIDTH: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 2.312 INCHES IN
•
NUT DIAMETER: 2.670 INCHES MINIMUM AND 2.710 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
HOLE CONFIGURATION STYLECONFIGURATION J
THREAD PITCH DIAMETERS+2.2719 TO 2.2773 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
DRIVE POINT WIDTH0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE2.312 INCHES IN
NUT DIAMETER2.670 INCHES MINIMUM AND 2.710 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
NUT THICKNESS0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 114H4008-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114H4008-1?
114H4008-1 is a NUT,PLAIN,ROUND.
What is the NSN for 114H4008-1?
114H4008-1 is cataloged in the U.S. Government catalog under NSN 5310-00-883-4456. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114H4008-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.