PartsTable
Technical Data Sheet
Download PDF

114H3029-4 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

114H3029-4: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 9.670 INCHES MINIMUM AND 9.730 INCHES MAXIMUM IN, aperture_width: 8.100 INCHES MINIMUM AND 8.300 INCHES MAXIMUM IN, overall_length: 9.900 INCHES MINIMUM AND 9.960 INCHES MAXIMUM IN, aperture_length: 8.410 INCHES MINIMUM AND 8.470 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-019-8024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114H3029-4
NSN: 5330-00-019-8024
FSC: 5330 — Packing and Gasket Materials
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width9.670 INCHES MINIMUM AND 9.730 INCHES MAXIMUM IN
aperture_width8.100 INCHES MINIMUM AND 8.300 INCHES MAXIMUM IN
overall_length9.900 INCHES MINIMUM AND 9.960 INCHES MAXIMUM IN
aperture_length8.410 INCHES MINIMUM AND 8.470 INCHES MAXIMUM IN
inside_corner_radius0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
outside_corner_radius0.340 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
cross-sectional_thickness0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-6130 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_bolt_holes_along_width2.983 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-019-8024
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114H3029-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6130 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 8.100 INCHES MINIMUM AND 8.300 INCHES MAXIMUM IN
•
APERTURE LENGTH: 8.410 INCHES MINIMUM AND 8.470 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
INSIDE CORNER RADIUS0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6130 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH9.900 INCHES MINIMUM AND 9.960 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH9.670 INCHES MINIMUM AND 9.730 INCHES MAXIMUM IN
APERTURE WIDTH8.100 INCHES MINIMUM AND 8.300 INCHES MAXIMUM IN
APERTURE LENGTH8.410 INCHES MINIMUM AND 8.470 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.061 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.983 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 114H3029-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114H3029-4?
114H3029-4 is a GASKET.
What is the NSN for 114H3029-4?
114H3029-4 is cataloged in the U.S. Government catalog under NSN 5330-00-019-8024. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114H3029-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.