PartsTable
Technical Data Sheet
Download PDF

114D1064-1 — RETAINER,SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

114D1064-1: RETAINER,SEAL.

The RETAINER,SEAL is a the manufacturer industrial component. Key specifications include material: MAGNESIUM ALLOY AZ91C OVERALL, overall_height: 1.510 INCHES MINIMUM AND 1.514 INCHES MAXIMUM IN, seal_seat_depth: 0.453 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN, flange_thickness: 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, aperture_diameter: 7.240 INCHES MINIMUM AND 7.260 INCHES MAXIMUM IN, bolt_hole_diameter: 0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-830-4308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114D1064-1
NSN: 5330-00-830-4308
FSC: 5330 — Packing and Gasket Materials
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialMAGNESIUM ALLOY AZ91C OVERALL
overall_height1.510 INCHES MINIMUM AND 1.514 INCHES MAXIMUM IN
seal_seat_depth0.453 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN
flange_thickness0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
special_featuresTHREE HOLES 0.499 IN. MIN,0.508 IN. MAX DIA LOCATED 37.5,155 AND 205 DEG ALL DIAMETERS ON COMMON CENTERLINE CONCENTRIC W/EACH OTHER WITHIN 0.010 TIR IN
aperture_diameter7.240 INCHES MINIMUM AND 7.260 INCHES MAXIMUM IN
bolt_hole_diameter0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
bolt_hole_quantity10
seal_seat_diameter7.498 INCHES MINIMUM AND 7.502 INCHES MAXIMUM IN
bolt_circle_diameter9.740 INCHES MINIMUM AND 9.760 INCHES MAXIMUM IN
body_outside_diameter8.817 INCHES MINIMUM AND 8.818 INCHES MAXIMUM IN
mounting_flange_diameter10.496 INCHES MINIMUM AND 10.498 INCHES MAXIMUM IN
NSN5330-00-830-4308
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114D1064-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 8.817 INCHES MINIMUM AND 8.818 INCHES MAXIMUM IN
•
BOLT HOLE DIAMETER: 0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-M-56,HTA FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SEAL SEAT DIAMETER: 7.498 INCHES MINIMUM AND 7.502 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 7.240 INCHES MINIMUM AND 7.260 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 10
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.510 INCHES MINIMUM AND 1.514 INCHES MAXIMUM IN
FLANGE THICKNESS0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER8.817 INCHES MINIMUM AND 8.818 INCHES MAXIMUM IN
BOLT HOLE DIAMETER0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-M-56,HTA FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SEAL SEAT DIAMETER7.498 INCHES MINIMUM AND 7.502 INCHES MAXIMUM IN
APERTURE DIAMETER7.240 INCHES MINIMUM AND 7.260 INCHES MAXIMUM IN
BOLT HOLE QUANTITY10
BOLT CIRCLE DIAMETER9.740 INCHES MINIMUM AND 9.760 INCHES MAXIMUM IN
SPECIAL FEATURESTHREE HOLES 0.499 IN. MIN,0.508 IN. MAX DIA LOCATED 37.5,155 AND 205 DEG ALL DIAMETERS ON COMMON CENTERLINE CONCENTRIC W/EACH OTHER WITHIN 0.010 TIR IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy 114D1064-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114D1064-1?
114D1064-1 is a RETAINER,SEAL.
What is the NSN for 114D1064-1?
114D1064-1 is cataloged in the U.S. Government catalog under NSN 5330-00-830-4308. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114D1064-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.