PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114CS125-4
114CS125-4 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, overall_length: 3.0790 INCHES MINIMUM AND 3.1215 INCHES MAXIMUM IN, thread_diameter: 0.500 INCHES NOMINAL IN, special_features: 9DEG MAX MISALIGNMENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-410-5949, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114CS125-4
NSN: 3120-00-410-5949
FSC: 3120
CAGE: 15860 — NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION (USA)
SPECIFICATIONS
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
overall_length3.0790 INCHES MINIMUM AND 3.1215 INCHES MAXIMUM IN
thread_diameter0.500 INCHES NOMINAL IN
special_features9DEG MAX MISALIGNMENT
style_designatorBALL TYPE
thread_directionRIGHT-HAND
inner_member_width0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
outer_member_width0.5100 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM IN
shank_thread_length1.4700 INCHES MINIMUM AND 1.5600 INCHES MAXIMUM IN
thread_quantity_per_inch20
NSN3120-00-410-5949
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 114CS125-4 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.5100 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
TEST DATA DOCUMENT: 77272-5424 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
THREAD QUANTITY PER INCH: 20
•
STYLE DESIGNATOR: BALL TYPE
•
STATIC RADIAL LOAD RATING: 16900 POUNDS LBS
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES9DEG MAX MISALIGNMENT
BORE DIAMETER0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.5100 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
TEST DATA DOCUMENT77272-5424 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD QUANTITY PER INCH20
STYLE DESIGNATORBALL TYPE
STATIC RADIAL LOAD RATING16900 POUNDS LBS
THREAD SERIES DESIGNATORUNF
THREAD CLASS3A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
225809Interchangeable
interchangeable cross-reference
interchangeable
H582Interchangeable
interchangeable cross-reference
interchangeable
WR10905Interchangeable
interchangeable cross-reference
interchangeable
77362Interchangeable
interchangeable cross-reference
interchangeable
31265Interchangeable
interchangeable cross-reference
interchangeable
210-601Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114CS125-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114CS125-4?
114CS125-4 is a BEARING,PLAIN,ROD END.
What parts can replace 114CS125-4?
There are 11 known substitutes for 114CS125-4: 225809, H582, WR10905 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 114CS125-4?
114CS125-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-410-5949. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114CS125-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026