114C3318-20 — BELL CRANK

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

114C3318-20: BELL CRANK.

The BELL CRANK is a the manufacturer industrial component. Key specifications include material: MAGNESIUM, bore_length: 2.560 INCHES NOMINAL IN, bore_diameter: 1.880 INCHES NOMINAL IN, style_designator: RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS, counterbore_depth: 0.385 INCHES NOMINAL IN, counterbore_diameter: 2.060 INCHES MINIMUM AND 2.061 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3040-00-789-7783, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

114C3318-20

NSN: 3040-00-789-7783
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 77272 — THE BOEING COMPANY (USA)

SPECIFICATIONS

material	MAGNESIUM
bore_length	2.560 INCHES NOMINAL IN
bore_diameter	1.880 INCHES NOMINAL IN
style_designator	RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS
counterbore_depth	0.385 INCHES NOMINAL IN
counterbore_diameter	2.060 INCHES MINIMUM AND 2.061 INCHES MAXIMUM IN
end_hole/ball_diameter	0.376 INCHES MINIMUM AND 0.377 INCHES MAXIMUM SECOND END IN
end_item_identification	CH-47
center_to_center_distance_between_fulcrum_and_arm_end_hole/slot/ball	4.795 INCHES NOMINAL FIRST END IN
NSN	3040-00-789-7783

COMPONENT DIAGRAM

KEY FEATURES

•

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL: 6.500 INCHES NOMINAL SECOND END IN

•

END HOLE/BALL DIAMETER: 0.376 INCHES MINIMUM AND 0.377 INCHES MAXIMUM SECOND END IN

•

BORE LENGTH: 2.560 INCHES NOMINAL IN

•

STYLE DESIGNATOR: RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS

•

COUNTERBORE DEPTH: 0.385 INCHES NOMINAL IN

•

COUNTERBORE DIAMETER: 2.060 INCHES MINIMUM AND 2.061 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	6.500 INCHES NOMINAL SECOND END IN
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	4.795 INCHES NOMINAL FIRST END IN
END HOLE/BALL DIAMETER	0.376 INCHES MINIMUM AND 0.377 INCHES MAXIMUM SECOND END IN
END HOLE/BALL DIAMETER	0.501 INCHES MINIMUM AND 0.502 INCHES MAXIMUM FIRST END IN
BORE LENGTH	2.560 INCHES NOMINAL IN
STYLE DESIGNATOR	RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS
COUNTERBORE DEPTH	0.385 INCHES NOMINAL IN
COUNTERBORE DIAMETER	2.060 INCHES MINIMUM AND 2.061 INCHES MAXIMUM IN
END ITEM IDENTIFICATION	CH-47
BORE DIAMETER	1.880 INCHES NOMINAL IN

OTHER ITEMS IN FSC 3040 — Miscellaneous Power Transmission Equipment

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3040-00-001-0046 3040-00-001-0047 3040-00-001-0048 3040-00-001-0068 3040-00-001-0077 3040-00-001-0078 3040-00-001-0089 3040-00-001-1224

SUBSTITUTES & CROSS-REFERENCES 1

114C3318-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)

Ready to buy 114C3318-20?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 114C3318-20?

114C3318-20 is a BELL CRANK.

What parts can replace 114C3318-20?

There is 1 known substitute for 114C3318-20: 114C3318-1. Substitute compatibility should be verified for your specific system.

What is the NSN for 114C3318-20?

114C3318-20 is cataloged in the U.S. Government catalog under NSN 3040-00-789-7783. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

114C3318-20 — BELL CRANK

Request a Quote — 114C3318-20