PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114B7017-3
114B7017-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2017 AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.228 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.875 INCHES NOMINAL IN, aperture_width: 6.845 INCHES NOMINAL IN, overall_length: 10.125 INCHES NOMINAL IN, aperture_length: 9.095 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-020-6229, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114B7017-3
NSN: 5330-00-020-6229
FSC: 5330
CAGE: 78022 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2017 AND RUBBER SYNTHETIC OVERALL
hole_diameter0.228 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.875 INCHES NOMINAL IN
aperture_width6.845 INCHES NOMINAL IN
overall_length10.125 INCHES NOMINAL IN
aperture_length9.095 INCHES NOMINAL IN
special_featuresALUMINUM ALLOY ANODIZED
style_designatorNON-CIRCULAR
bolt_hole_quantity18
gage_ring_thickness0.120 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
fsc_application_dataPOWER SUPPLY,RADAR SET,NAVIGATION,AIRBORNE
inside_corner_radius0.188 INCHES NOMINAL IN
NSN5330-00-020-6229
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114B7017-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
OUTSIDE CORNER RADIUS: 0.188 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2017 AND RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.188 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.820 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL WIDTH7.875 INCHES NOMINAL IN
OVERALL LENGTH10.125 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.188 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2017 AND RUBBER SYNTHETIC OVERALL
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL THICKNESS0.188 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.820 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE WIDTH6.845 INCHES NOMINAL IN
BOLT HOLE QUANTITY18
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
4330Interchangeable
interchangeable cross-reference
interchangeable
2902Interchangeable
interchangeable cross-reference
interchangeable
M2968Interchangeable
interchangeable cross-reference
interchangeable
313-001-001Interchangeable
interchangeable cross-reference
interchangeable
93J1R0Interchangeable
interchangeable cross-reference
interchangeable
TS1042Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114B7017-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114B7017-3?
114B7017-3 is a GASKET.
What parts can replace 114B7017-3?
There are 14 known substitutes for 114B7017-3: 4330, 2902, M2968 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 114B7017-3?
114B7017-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-020-6229. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114B7017-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026