PartsTable
Technical Data Sheet
Download PDF

114994 — SOCKET,WRENCHING,TUBE FITTING

✓ Government record, cited
Hama · NUT WASHER
PRODUCT OVERVIEW

114994: SOCKET,WRENCHING,TUBE FITTING.

The SOCKET,WRENCHING,TUBE FITTING is a Hama industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.488 INCHES MINIMUM AND 2.512 INCHES MAXIMUM IN, pin_overall_diameter: 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.016 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-664-5982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114994
NSN: 5315-00-664-5982
NIINs: 006645982, 017060578
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length2.488 INCHES MINIMUM AND 2.512 INCHES MAXIMUM IN
pin_overall_diameter0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.016 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-664-5982
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 114994 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.488 INCHES MINIMUM AND 2.512 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.488 INCHES MINIMUM AND 2.512 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
5315006645982Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 114994?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114994?
114994 is a SOCKET,WRENCHING,TUBE FITTING manufactured by Hama.
What parts can replace 114994?
There is 1 known substitute for 114994: 5315006645982. Substitute compatibility should be verified for your specific system.
What is the NSN for 114994?
114994 is cataloged in the U.S. Government catalog under NSN 5315-00-664-5982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114994