PartsTable
Technical Data Sheet
Download PDF

114965PC365 — ELBOW,TUBE TO BOSS

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

114965PC365: ELBOW,TUBE TO BOSS.

The ELBOW,TUBE TO BOSS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, flow_angle: 90.0 DEGREES, leg_length: 1.812 INCHES NOMINAL SECOND END IN, seat_angle: 0.0 DEGREES FIRST END, thread_class: 2A SECOND END A, inlet_location: LOW HEEL SINGLE INLET. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-349-6739, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114965PC365
NSN: 4730-00-349-6739
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
flow_angle90.0 DEGREES
leg_length1.812 INCHES NOMINAL SECOND END IN
seat_angle0.0 DEGREES FIRST END
thread_class2A SECOND END A
inlet_locationLOW HEEL SINGLE INLET
connection_typeTHREADED INTERNAL TUBE FIRST END
connection_styleEXTERNAL SEAT FOR GASKET SEAL (BOSS) SECOND END
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size1.000 INCHES FIRST END IN
media_for_which_designedUNABLE TO DECODE
thread_series_designatorNPT INLET
NSN4730-00-349-6739
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 114965PC365 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES
•
NOMINAL PIPE SIZE ACCOMMODATED: 0.375 INCHES INLET IN
•
CONNECTION STYLE: EXTERNAL SEAT FOR GASKET SEAL (BOSS) SECOND END
•
INLET LOCATION: LOW HEEL SINGLE INLET
•
CONNECTION TYPE: THREADED INTERNAL PIPE INLET
TECHNICAL CHARACTERISTICS
FLOW ANGLE90.0 DEGREES
NOMINAL PIPE SIZE ACCOMMODATED0.375 INCHES INLET IN
CONNECTION STYLEEXTERNAL SEAT FOR GASKET SEAL (BOSS) SECOND END
CONNECTION STYLEGASKET SEAL (TUBE) FIRST END
CONNECTION STYLEPLAIN (PIPE) INLET
INLET LOCATIONLOW HEEL SINGLE INLET
CONNECTION TYPETHREADED INTERNAL PIPE INLET
CONNECTION TYPETHREADED EXTERNAL BOSS SECOND END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES 1
886BReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 114965PC365?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114965PC365?
114965PC365 is a ELBOW,TUBE TO BOSS.
What parts can replace 114965PC365?
There is 1 known substitute for 114965PC365: 886B. Substitute compatibility should be verified for your specific system.
What is the NSN for 114965PC365?
114965PC365 is cataloged in the U.S. Government catalog under NSN 4730-00-349-6739. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114965PC365