PartsTable
Technical Data Sheet
Download PDF

114947 — WASHER,FLAT

✓ Government record, cited
Hama · NUT WASHER
PRODUCT OVERVIEW

114947: WASHER,FLAT.

The WASHER,FLAT is a Hama industrial component. Key specifications include thickness: 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, hole_diameter: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, overall_diameter: 0.727 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND, cross-sectional_shape_style: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-4947, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114947
NSN: 5310-00-011-4947
FSC: 5310 — Nuts and Washers
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
thickness0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
hole_diameter0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
overall_diameter0.727 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-011-4947
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 114947 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.727 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
THICKNESS: 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.727 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
THICKNESS0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
940B516Reference document
Same NSN cross-reference
Reference document — Identification reference
P661Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BEBX2ABReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 114947?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114947?
114947 is a WASHER,FLAT manufactured by Hama.
What parts can replace 114947?
There are 3 known substitutes for 114947: 940B516, P661, BEBX2AB. Substitute compatibility should be verified for your specific system.
What is the NSN for 114947?
114947 is cataloged in the U.S. Government catalog under NSN 5310-00-011-4947. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114947

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.