PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114858
114858 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, end_radius: 0.500 INCHES NOMINAL IN, fork_depth: 1.000 INCHES NOMINAL IN, shank_length: 0.750 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.194 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-135-7572, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114858
NSN: 5340-00-135-7572
FSC: 5340
CAGE: 96421 — DEPARTMENT OF THE NAVY COMMANDING OFFICER NAVAL AVIATION DEPOT (USA)
SPECIFICATIONS
materialIRON OVERALL
end_radius0.500 INCHES NOMINAL IN
fork_depth1.000 INCHES NOMINAL IN
cam_quantity2
shank_length0.750 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
hole_diameter0.194 INCHES NOMINAL IN
overall_width0.433 INCHES NOMINAL IN
thread_length0.850 INCHES NOMINAL ROD CONNECTION IN
overall_height0.937 INCHES NOMINAL IN
shank_diameter0.437 INCHES NOMINAL IN
fork_span_width0.302 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
NSN5340-00-135-7572
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114858 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK ARM THICKNESS: 0.063 INCHES NOMINAL IN
•
SHANK DIAMETER: 0.437 INCHES NOMINAL IN
•
END RADIUS: 0.500 INCHES NOMINAL IN
•
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END: 0.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
FORK SPAN WIDTH: 0.302 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
•
FORK DEPTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FORK ARM THICKNESS0.063 INCHES NOMINAL IN
SHANK DIAMETER0.437 INCHES NOMINAL IN
END RADIUS0.500 INCHES NOMINAL IN
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END0.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
FORK SPAN WIDTH0.302 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
FORK DEPTH1.000 INCHES NOMINAL IN
OVERALL WIDTH0.433 INCHES NOMINAL IN
SHANK LENGTH0.750 INCHES NOMINAL IN
HOLE DIAMETER0.194 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
MS27977-65BInterchangeable
interchangeable cross-reference
interchangeable
BL33Interchangeable
interchangeable cross-reference
interchangeable
114858Interchangeable
interchangeable cross-reference
interchangeable
11C9030CInterchangeable
interchangeable cross-reference
interchangeable
193421H1Interchangeable
interchangeable cross-reference
interchangeable
4-13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114858?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114858?
114858 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 114858?
There are 6 known substitutes for 114858: MS27977-65B, BL33, 114858 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 114858?
114858 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-135-7572. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114858

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026