PartsTable
Technical Data Sheet
Download PDF

11473324-2 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11473324-2: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include width: 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN, length: 14.750 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHIONING, thickness: 0.625 INCHES NOMINAL IN, special_features: RESISTANCE TO FUNGUS IN ACCORDANCE WITH MIL-STD-810;METHOD 508. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-472-5923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11473324-2
NSN: 5340-01-472-5923
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
length14.750 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHIONING
thickness0.625 INCHES NOMINAL IN
special_featuresRESISTANCE TO FUNGUS IN ACCORDANCE WITH MIL-STD-810;METHOD 508
NSN5340-01-472-5923
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11473324-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 14.750 INCHES NOMINAL IN
•
WIDTH: 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHIONING
•
THICKNESS: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH14.750 INCHES NOMINAL IN
SPECIAL FEATURESRESISTANCE TO FUNGUS IN ACCORDANCE WITH MIL-STD-810;METHOD 508
WIDTH0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHIONING
THICKNESS0.625 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
11473324Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11473324-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11473324-2?
11473324-2 is a PAD,CUSHIONING.
What parts can replace 11473324-2?
There is 1 known substitute for 11473324-2: 11473324. Substitute compatibility should be verified for your specific system.
What is the NSN for 11473324-2?
11473324-2 is cataloged in the U.S. Government catalog under NSN 5340-01-472-5923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11473324-2