PartsTable
Technical Data Sheet
PartsTable / MRO / 11468
11468 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OVERALL, end_style: SPRING END,GROUND OVERALL, point_type: CONVENTIONAL, shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.230 INCHES NOMINAL SINGLE ACTUATOR IN, point_angle: 118.0 DEGREES NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0670, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11468
NSN: 3110-00-100-0670
FSC: 3110
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OVERALL
end_styleSPRING END,GROUND OVERALL
point_typeCONVENTIONAL
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.230 INCHES NOMINAL SINGLE ACTUATOR IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length3.438 INCHES NOMINAL IN
shaft_length0.375 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
overall_width1.250 INCHES NOMINAL IN
pole_quantity1 SINGLE SECTION FRONT
NSN3110-00-100-0670
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11468 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
J512Interchangeable
interchangeable cross-reference
interchangeable
SAE-J512Interchangeable
interchangeable cross-reference
interchangeable
CV178570Interchangeable
interchangeable cross-reference
interchangeable
10847Interchangeable
interchangeable cross-reference
interchangeable
10350Interchangeable
interchangeable cross-reference
interchangeable
8202 EPRTSInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11468?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11468?
11468 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11468?
There are 30 known substitutes for 11468: J512, SAE-J512, CV178570 and 27 more. Substitute compatibility should be verified for your specific system.
Is 11468 still available?
11468 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11468

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026