PartsTable
Technical Data Sheet
Download PDF

11467809 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11467809: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN, length: 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN, material: COPPER ALLOY 170 AND COPPER ALLOY 172 OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN, overall_height: 1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-534-5052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11467809
NSN: 5340-01-534-5052
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
length1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
materialCOPPER ALLOY 170 AND COPPER ALLOY 172 OVERALL
hole_diameter0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
hole_quantity3
overall_height1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
style_designatorSTANDOFF
surface_treatmentCADMIUM OVERALL
material_thickness0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop/holding_dimension0.920 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
mounting_facility_diameter0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
NSN5340-01-534-5052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11467809 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
•
MOUNTING FACILITY QUANTITY: 3
•
LENGTH: 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, CLASS 2, TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: STANDOFF
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B194, T800 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
OVERALL HEIGHT1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
MOUNTING FACILITY QUANTITY3
LENGTH1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, CLASS 2, TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
STYLE DESIGNATORSTANDOFF
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B194, T800 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.920 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
MATERIAL THICKNESS0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 11467809?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11467809?
11467809 is a CLIP,SPRING TENSION.
What is the NSN for 11467809?
11467809 is cataloged in the U.S. Government catalog under NSN 5340-01-534-5052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11467809

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.