PartsTable
Technical Data Sheet
Download PDF

11465405 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11465405: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, hole_diameter: 0.380 INCHES MINIMUM AND 0.420 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 8.250 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, end_item_identification: 1430-01-087-6330;RADAR SET,SEMI-TRAILER MOUNTED. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-496-5106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11465405
NSN: 5330-01-496-5106
FSC: 5330 — Packing and Gasket Materials
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
hole_diameter0.380 INCHES MINIMUM AND 0.420 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.750 INCHES NOMINAL IN
overall_length8.250 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity2
end_item_identification1430-01-087-6330;RADAR SET,SEMI-TRAILER MOUNTED
cross-sectional_thickness0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-STD-670 AND MIL-C-3133 GRADE-TE12 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyGASKET,AIR DUCT
bolt_hole_centerline_to_nearest_edge_distance0.310 INCHES NOMINAL IN
NSN5330-01-496-5106
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11465405 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-STD-670 AND MIL-C-3133 GRADE-TE12 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.310 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-STD-670 AND MIL-C-3133 GRADE-TE12 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH8.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH0.750 INCHES NOMINAL IN
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.310 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH5.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH1.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11465405?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11465405?
11465405 is a GASKET.
What is the NSN for 11465405?
11465405 is cataloged in the U.S. Government catalog under NSN 5330-01-496-5106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11465405

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.