PartsTable
Technical Data Sheet
Download PDF

11461075 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11461075: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, chamfer_angle: 45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED, hole_diameter: 0.113 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, chamfer_length: 0.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 13.500 INCHES NOMINAL IN, overall_diameter: 0.495 INCHES MINIMUM AND 0.497 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-440-9216, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11461075
NSN: 5340-01-440-9216
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
chamfer_angle45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
hole_diameter0.113 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
chamfer_length0.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_length13.500 INCHES NOMINAL IN
overall_diameter0.495 INCHES MINIMUM AND 0.497 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
drilled_hole_locationBOTH ENDS
distance_from_end_to_hole_center0.220 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35, TY 1,2 OR 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-440-9216
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11461075 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35, TY 1,2 OR 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.495 INCHES MINIMUM AND 0.497 INCHES MAXIMUM IN
•
DRILLED HOLE LOCATION: BOTH ENDS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
HOLE DIAMETER: 0.113 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.060 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35, TY 1,2 OR 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.495 INCHES MINIMUM AND 0.497 INCHES MAXIMUM IN
DRILLED HOLE LOCATIONBOTH ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH13.500 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
HOLE DIAMETER0.113 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
CHAMFER ANGLE45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
DISTANCE FROM END TO HOLE CENTER0.220 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 11461075?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11461075?
11461075 is a ROD,STRAIGHT,HEADLESS.
What is the NSN for 11461075?
11461075 is cataloged in the U.S. Government catalog under NSN 5340-01-440-9216. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11461075

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.