PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114564GM
114564GM ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include radius: 2.875 INCHES NOMINAL IN, material: STEEL, outside_diameter: 1.870 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN, style_designator: CONCAVE, material_thickness: 0.083 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-1412, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114564GM
NSN: 5340-00-054-1412
FSC: 5340
CAGE: 38854 — MASTER PRODUCTS COMPANY, THE DIV THE MASTER PRODUCTS COMPANY (USA)
SPECIFICATIONS
radius2.875 INCHES NOMINAL IN
materialSTEEL
outside_diameter1.870 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN
style_designatorCONCAVE
material_thickness0.083 INCHES NOMINAL IN
NSN5340-00-054-1412
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114564GM MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
RADIUS: 2.875 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.870 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CONCAVE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
MATERIALSTEEL
RADIUS2.875 INCHES NOMINAL IN
OUTSIDE DIAMETER1.870 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN
STYLE DESIGNATORCONCAVE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
A-A-52420-15Interchangeable
interchangeable cross-reference
interchangeable
140089Interchangeable
interchangeable cross-reference
interchangeable
WPP1677Interchangeable
interchangeable cross-reference
interchangeable
S703Interchangeable
interchangeable cross-reference
interchangeable
172531Interchangeable
interchangeable cross-reference
interchangeable
X2247Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114564GM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114564GM?
114564GM is a PLUG,EXPANSION.
What parts can replace 114564GM?
There are 32 known substitutes for 114564GM: A-A-52420-15, 140089, WPP1677 and 29 more. Substitute compatibility should be verified for your specific system.
Is 114564GM still available?
114564GM is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114564GM

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026