PartsTable
Technical Data Sheet

1145/1418 — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1145/1418: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC), special_features: COLOR YELLOW, length_under_shoulder: 1.100 INCHES NOMINAL IN, open_end_inside_diameter: 0.760 INCHES NOMINAL IN, closed_end_overall_diameter: 1.340 INCHES NOMINAL IN, material_document_and_classification: L-P-1035, COMP A FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-447-5009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1145/1418
NSN: 5340-00-447-5009
FSC: 5340 — Hardware, Commercial
CAGE: K7776 — AMETEK AIRTECHNOLOGY GROUP LIMITED (GBR)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC)
special_featuresCOLOR YELLOW
length_under_shoulder1.100 INCHES NOMINAL IN
open_end_inside_diameter0.760 INCHES NOMINAL IN
closed_end_overall_diameter1.340 INCHES NOMINAL IN
material_document_and_classificationL-P-1035, COMP A FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-447-5009
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1145/1418 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 1.340 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 1.100 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-1035, COMP A FED SPEC SINGLE MATERIAL RESPONSE
•
OPEN END INSIDE DIAMETER: 0.760 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER1.340 INCHES NOMINAL IN
LENGTH UNDER SHOULDER1.100 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-1035, COMP A FED SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESCOLOR YELLOW
OPEN END INSIDE DIAMETER0.760 INCHES NOMINAL IN
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC)
SUBSTITUTES & CROSS-REFERENCES 4
10293024Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
87765-5504 ITEM 28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A4/1145/1418Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6129486 ITEM 28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1145/1418?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1145/1418?
1145/1418 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 1145/1418?
There are 4 known substitutes for 1145/1418: 10293024, 87765-5504 ITEM 28, A4/1145/1418 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1145/1418?
1145/1418 is cataloged in the U.S. Government catalog under NSN 5340-00-447-5009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1145/1418