PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11444624-3
11444624-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, overall_width: 0.375 INCHES NOMINAL IN, material_thickness: 0.050 INCHES NOMINAL IN, loop_inside_diameter: 0.250 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 0.628 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 0.409 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-116-0038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11444624-3
NSN: 5340-01-116-0038
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.628 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.409 INCHES NOMINAL IN
NSN5340-01-116-0038
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11444624-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.409 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.628 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.409 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.628 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
USAF330-4Interchangeable
interchangeable cross-reference
interchangeable
330-4Interchangeable
interchangeable cross-reference
interchangeable
FFB571TYPEA4Interchangeable
interchangeable cross-reference
interchangeable
R10562P3Interchangeable
interchangeable cross-reference
interchangeable
BACC10DX3Interchangeable
interchangeable cross-reference
interchangeable
578Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11444624-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11444624-3?
11444624-3 is a CLAMP,LOOP.
What parts can replace 11444624-3?
There are 26 known substitutes for 11444624-3: USAF330-4, 330-4, FFB571TYPEA4 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11444624-3?
11444624-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-116-0038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11444624-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026