PartsTable
Technical Data Sheet
PartsTable / MRO / 11444
11444 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include height: 0.622 INCHES NOMINAL IN, length: 0.250 INCHES NOMINAL SQUARE END IN, material: COPPER ALLOY OVERALL, head_style: SQUARE, point_type: CONVENTIONAL, slot_width: 1.0625 INCHES NOMINAL FIRST IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-6850, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11444
NSN: 5305-00-010-6850
FSC: 5305
CAGE: 03476 — TEREX REEDRILL DBA REEDRILL TEXOMA DIV TEREX MINING (USA)
SPECIFICATIONS
height0.622 INCHES NOMINAL IN
length0.250 INCHES NOMINAL SQUARE END IN
materialCOPPER ALLOY OVERALL
head_styleSQUARE
point_typeCONVENTIONAL
slot_width1.0625 INCHES NOMINAL FIRST IN
head_height0.281 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
point_styleFULL DOG
shank_styleSTRAIGHT ROUND
slot_length1.4375 INCHES NOMINAL FIRST IN
corner_shapeSQUARE ALL CORNERS
NSN5305-00-010-6850
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11444 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: CASEHARDENED
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
THREAD CLASS: 2A A
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 5 STYLE
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1020 OVERALL
•
HEAD HEIGHT: 0.281 INCHES NOMINAL IN
•
WIDTH BETWEEN FLATS: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDCASEHARDENED
NOMINAL THREAD DIAMETER0.375 INCHES IN
THREAD CLASS2A A
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 5 STYLE
MATERIALSTEEL COMP 1010 OR STEEL COMP 1020 OVERALL
HEAD HEIGHT0.281 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.375 INCHES NOMINAL IN
POINT STYLEFULL DOG
FASTENER LENGTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
FFS103TYPE1STYLE5Interchangeable
interchangeable cross-reference
interchangeable
FFS103,TY1,ST5Interchangeable
interchangeable cross-reference
interchangeable
H2311 PIECE 38Interchangeable
interchangeable cross-reference
interchangeable
113060Interchangeable
interchangeable cross-reference
interchangeable
H2311 PIECE 39Interchangeable
interchangeable cross-reference
interchangeable
E341062C200Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11444?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11444?
11444 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11444?
There are 18 known substitutes for 11444: FFS103TYPE1STYLE5, FFS103,TY1,ST5, H2311 PIECE 38 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11444?
11444 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-6850. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11444

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026