PartsTable
Technical Data Sheet
Download PDF

11433C6-4-5-6 — PIN,DRIVE,POWER ACTUATED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11433C6-4-5-6: PIN,DRIVE,POWER ACTUATED.

The PIN,DRIVE,POWER ACTUATED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OVERALL, shank_length: 1.062 INCHES NOMINAL1.062 INCHES NOMINAL IN, thread_class: 3A3A, thread_length: 0.405 INCHES NOMINAL0.405 INCHES NOMINAL IN, overall_length: 1.467 INCHES NOMINAL1.467 INCHES NOMINAL IN, shank_diameter: 0.2490 INCHES MINIMUM AND 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-351-2993, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11433C6-4-5-6
NSN: 5315-01-351-2993
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OVERALL
shank_length1.062 INCHES NOMINAL1.062 INCHES NOMINAL IN
thread_class3A3A
thread_length0.405 INCHES NOMINAL0.405 INCHES NOMINAL IN
overall_length1.467 INCHES NOMINAL1.467 INCHES NOMINAL IN
shank_diameter0.2490 INCHES MINIMUM AND 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM0.2495 INCHES MAXIMUM IN
style_designatorGUIDED OR POWDER ACTUATED
thread_directionRIGHT-HANDRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES0.250 INCHES IN
washer_outside_diameter0.506 INCHES NOMINAL0.506 INCHES NOMINAL IN
NSN5315-01-351-2993
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11433C6-4-5-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM0.2495 INCHES MAXIMUM IN
•
WASHER OUTSIDE DIAMETER: 0.506 INCHES NOMINAL0.506 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.405 INCHES NOMINAL0.405 INCHES NOMINAL IN
•
SHANK LENGTH: 1.062 INCHES NOMINAL1.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: GUIDED OR POWDER ACTUATED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 CONDITION B FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.2490 INCHES MINIMUM AND 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM0.2495 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.506 INCHES NOMINAL0.506 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.405 INCHES NOMINAL0.405 INCHES NOMINAL IN
SHANK LENGTH1.062 INCHES NOMINAL1.062 INCHES NOMINAL IN
STYLE DESIGNATORGUIDED OR POWDER ACTUATED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 CONDITION B FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH1.467 INCHES NOMINAL1.467 INCHES NOMINAL IN
MATERIAL THICKNESS0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 4
TBD-4-5-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AIC943-4-5-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
03A259-4-5-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11433C4-5-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11433C6-4-5-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11433C6-4-5-6?
11433C6-4-5-6 is a PIN,DRIVE,POWER ACTUATED.
What parts can replace 11433C6-4-5-6?
There are 4 known substitutes for 11433C6-4-5-6: TBD-4-5-6, AIC943-4-5-6, 03A259-4-5-6 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11433C6-4-5-6?
11433C6-4-5-6 is cataloged in the U.S. Government catalog under NSN 5315-01-351-2993. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11433C6-4-5-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.