PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114191
114191 ✓ Verified by PartsTable
Integral LED · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

This premium 5W retro-fit Integral LED GU10 delivers a warm white light and brightness, similar to a 35W halogen bulb. It features three high output CREE LEDs, an anti-glare refractor, all finished in a diecast aluminium, thermally efficient body. The ideal lamp for commercial and home use.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-579-7695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114191
NSN: 5340-00-579-7695
FSC: 5340
CAGE: 05690 — BARKER & WILLIAMSON (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
overall_length4.875 INCHES NOMINAL IN
handle_clearance1.125 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.216 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity2
center_to_center_distance_between_mounting_facilities_parallel_to_length4.500 INCHES NOMINAL IN
NSN5340-00-579-7695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114191 MFR: Integral LED ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.216 INCHES IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HANDLE CLEARANCE: 1.125 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.500 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
MATERIAL: ALUMINUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH4.875 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.216 INCHES IN
SURFACE TREATMENTANODIZE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HANDLE CLEARANCE1.125 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.500 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
MATERIALALUMINUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
12711Upgraded Successor
successor cross-reference
successor
X-1884Interchangeable
interchangeable cross-reference
interchangeable
60314Interchangeable
interchangeable cross-reference
interchangeable
IT-1.50IPSInterchangeable
interchangeable cross-reference
interchangeable
1110-150Interchangeable
interchangeable cross-reference
interchangeable
2664325-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114191?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114191?
114191 is a HOSE ASSEMBLY,NONMETALLIC manufactured by Integral LED.
What parts can replace 114191?
There are 11 known substitutes for 114191: 12711, X-1884, 60314 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 114191?
114191 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-579-7695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114191

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026