11415E4D4-10 — PIN,SHOULDER,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

11415E4D4-10: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, shank_length: 0.405 INCHES NOMINAL IN, shank_diameter: 0.250 INCHES NOMINAL IN, first_end_style: CHAMFERED, second_end_style: CHAMFERED, style_designator: SHOULDER. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-722-2033, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

11415E4D4-10

NSN: 5315-01-722-2033
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)

SPECIFICATIONS

material	STEEL COMP XM-13 OVERALL
shank_length	0.405 INCHES NOMINAL IN
shank_diameter	0.250 INCHES NOMINAL IN
first_end_style	CHAMFERED
second_end_style	CHAMFERED
style_designator	SHOULDER
surface_treatment	PASSIVATE OVERALL
first_end_location	THREADED END
second_shank_length	0.875 INCHES NOMINAL IN
second_end_tip_radius	0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
second_shank_diameter	0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
second_end_taper_length	0.250 INCHES NOMINAL IN
NSN	5315-01-722-2033

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.250 INCHES NOMINAL IN

•

SECOND SHANK DIAMETER: 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN

•

FIRST END LOCATION: THREADED END

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS2700, METHOD 1 OR ASTM A967 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL

•

FIRST END STYLE: CHAMFERED

•

SHANK LENGTH: 0.405 INCHES NOMINAL IN

•

STYLE DESIGNATOR: SHOULDER

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.250 INCHES NOMINAL IN
SECOND SHANK DIAMETER	0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
FIRST END LOCATION	THREADED END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS2700, METHOD 1 OR ASTM A967 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLE	CHAMFERED
SHANK LENGTH	0.405 INCHES NOMINAL IN
STYLE DESIGNATOR	SHOULDER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5629 AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE OVERALL
SECOND END TAPER LENGTH	0.250 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL

SUBSTITUTES & CROSS-REFERENCES 3

NGL20ADE4D4-10Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

VS3258E4D4-10Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

NGL20ADReference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 11415E4D4-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 11415E4D4-10?

11415E4D4-10 is a PIN,SHOULDER,HEADLESS.

What parts can replace 11415E4D4-10?

There are 3 known substitutes for 11415E4D4-10: NGL20ADE4D4-10, VS3258E4D4-10, NGL20AD. Substitute compatibility should be verified for your specific system.

What is the NSN for 11415E4D4-10?

11415E4D4-10 is cataloged in the U.S. Government catalog under NSN 5315-01-722-2033. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

11415E4D4-10 — PIN,SHOULDER,HEADLESS

Request a Quote — 11415E4D4-10