11415C3C2-4 — PIN,SHOULDER,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

11415C3C2-4: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE OVERALL, shank_length: 0.125 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.345 INCHES NOMINAL IN, overall_length: 0.845 INCHES NOMINAL IN, shank_diameter: 0.189 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-530-6563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

11415C3C2-4

NSN: 5315-01-530-6563
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)

SPECIFICATIONS

material	STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE OVERALL
shank_length	0.125 INCHES NOMINAL IN
thread_class	3A A
thread_length	0.345 INCHES NOMINAL IN
overall_length	0.845 INCHES NOMINAL IN
shank_diameter	0.189 INCHES NOMINAL IN
first_end_style	CHAMFERED
second_end_style	CHAMFERED
style_designator	SHOULDER
thread_direction	RIGHT-HAND
shoulder_diameter	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
surface_treatment	PASSIVATE OVERALL
NSN	5315-01-530-6563

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.189 INCHES NOMINAL IN

•

SECOND SHANK DIAMETER: 0.185 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.125 INCHES NOMINAL IN

•

FIRST END LOCATION: THREADED END

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

SECOND END TAPER ANGLE: 45.0 DEGREES NOMINAL

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

THREAD LENGTH: 0.345 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.189 INCHES NOMINAL IN
SECOND SHANK DIAMETER	0.185 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.125 INCHES NOMINAL IN
FIRST END LOCATION	THREADED END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SECOND END TAPER ANGLE	45.0 DEGREES NOMINAL
HOLE ARRANGEMENT STYLE	ONE END DRILLED
THREAD LENGTH	0.345 INCHES NOMINAL IN
FIRST END STYLE	CHAMFERED
FIRST HOLE DIAMETER	0.076 INCHES NOMINAL IN

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 3

VS3258C3C2-4Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

3M943C3C2-4Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AAP139C3C2-4Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 11415C3C2-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 11415C3C2-4?

11415C3C2-4 is a PIN,SHOULDER,HEADLESS.

What parts can replace 11415C3C2-4?

There are 3 known substitutes for 11415C3C2-4: VS3258C3C2-4, 3M943C3C2-4, AAP139C3C2-4. Substitute compatibility should be verified for your specific system.

What is the NSN for 11415C3C2-4?

11415C3C2-4 is cataloged in the U.S. Government catalog under NSN 5315-01-530-6563. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

11415C3C2-4 — PIN,SHOULDER,HEADLESS

Request a Quote — 11415C3C2-4