PartsTable
Technical Data Sheet
PartsTable / MRO / 1141002
1141002 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL OVERALL, cup_width: 1.4375 INCHES NOMINAL IN, cone_width: 1.8375 INCHES NOMINAL IN, body_length: 0.250 INCHES NOMINAL IN, body_diameter: 0.090 INCHES NOMINAL IN, bore_diameter: 3.2500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-757-2392, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1141002
NSN: 3110-00-757-2392
FSC: 3110
CAGE: 08302 — PACCAR WINCH INC DBA PACCAR WINCH DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width1.4375 INCHES NOMINAL IN
cone_width1.8375 INCHES NOMINAL IN
body_length0.250 INCHES NOMINAL IN
body_diameter0.090 INCHES NOMINAL IN
bore_diameter3.2500 INCHES NOMINAL IN
overall_width1.7500 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
standout_width0.3125 INCHES NOMINAL IN
terminal_length1.500 INCHES NOMINAL IN
style_designatorAXIAL TERMINAL EACH END
NSN3110-00-757-2392
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1141002 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.8375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 0
•
OVERALL OUTSIDE DIAMETER: 5.9090 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
CUP WIDTH: 1.4375 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH1.8375 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 0
OVERALL OUTSIDE DIAMETER5.9090 INCHES NOMINAL IN
OVERALL WIDTH1.7500 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
CUP WIDTH1.4375 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
STANDOUT WIDTH0.3125 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
GS570DG1Interchangeable
interchangeable cross-reference
interchangeable
742Interchangeable
interchangeable cross-reference
interchangeable
51G1300Interchangeable
interchangeable cross-reference
interchangeable
MMI-9998Interchangeable
interchangeable cross-reference
interchangeable
GS2386Interchangeable
interchangeable cross-reference
interchangeable
BRTG2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1141002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1141002?
1141002 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1141002?
There are 23 known substitutes for 1141002: GS570DG1, 742, 51G1300 and 20 more. Substitute compatibility should be verified for your specific system.
Is 1141002 still available?
1141002 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1141002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026