PartsTable
Technical Data Sheet
PartsTable / MRO / 11408-1
11408-1 ✓ Verified by PartsTable
Beko · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a Beko industrial component. Key specifications include body_style: HOLE MOUNT, body_width: 0.620 INCHES NOMINAL IN, bore_shape: STRAIGHT, body_length: 1.160 INCHES NOMINAL IN, bore_diameter: 0.9990 INCHES MINIMUM AND 0.9995 INCHES MAXIMUM IN, overall_width: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-9339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11408-1
NSN: 3110-00-159-9339
FSC: 3110
CAGE: 58265 — STRUTHERS WELLS CORP (USA)
SPECIFICATIONS
body_styleHOLE MOUNT
body_width0.620 INCHES NOMINAL IN
bore_shapeSTRAIGHT
body_length1.160 INCHES NOMINAL IN
bore_diameter0.9990 INCHES MINIMUM AND 0.9995 INCHES MAXIMUM IN
overall_width0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
actuator_styleROUND
inclosure_typeFULLY INCLOSED
surface_finishGROUND
actuator_height0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
locating_featureNONLOCATING
special_featuresWEAPON SYSTEM ESSENTIAL
NSN3110-00-159-9339
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11408-1 · Beko ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL CLEARANCE: 0.0010 INCHES MINIMUM RADIAL AND 0.0020 INCHES MAXIMUM RADIAL IN
•
LOCATING FEATURE: NONLOCATING
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, CYLINDRICAL INNER AND OUTER RING, SEPARABLE
•
BORE DIAMETER: 0.9990 INCHES MINIMUM AND 0.9995 INCHES MAXIMUM IN
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
•
OVERALL OUTSIDE DIAMETER: 2.2480 INCHES MINIMUM AND 2.2490 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL CLEARANCE0.0010 INCHES MINIMUM RADIAL AND 0.0020 INCHES MAXIMUM RADIAL IN
LOCATING FEATURENONLOCATING
BORE SHAPESTRAIGHT
OVERALL WIDTH0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, CYLINDRICAL INNER AND OUTER RING, SEPARABLE
BORE DIAMETER0.9990 INCHES MINIMUM AND 0.9995 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
OVERALL OUTSIDE DIAMETER2.2480 INCHES MINIMUM AND 2.2490 INCHES MAXIMUM IN
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
8211Interchangeable
interchangeable cross-reference
interchangeable
517175Interchangeable
interchangeable cross-reference
interchangeable
AN3022-8Interchangeable
interchangeable cross-reference
interchangeable
102-742PC15Interchangeable
Same NIIN cross-reference
interchangeable
514Interchangeable
Same NIIN cross-reference
interchangeable
102-342-1PC15Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11408-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11408-1?
11408-1 is a BEARING,ROLLER,CYLINDRICAL manufactured by Beko. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11408-1?
There are 7 known substitutes for 11408-1: 8211, 517175, AN3022-8 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11408-1?
11408-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-9339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11408-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026