PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114-4-2
114-4-2 ✓ Verified by PartsTable
InLine · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Printer cable for connecting printers with 36-pin Centronics connection to the LPT connection (parallel port) of the computer. Key specifications include color: WHITE, length: 0.250 INCHES NOMINAL SQUARE END IN, material: STEEL OVERALL, flow_angle: 90.0 DEGREES, head_style: HEXAGON, point_type: CONVENTIONAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-197-9611, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114-4-2
NSN: 5330-00-197-9611
FSC: 5330
CAGE: 81168 — STROHMEYER, JULIE A. DBA JULIE A. STROHMEYER (USA)
SPECIFICATIONS
colorWHITE
length0.250 INCHES NOMINAL SQUARE END IN
materialSTEEL OVERALL
flow_angle90.0 DEGREES
head_styleHEXAGON
point_typeCONVENTIONAL
design_typeSINGLE CENTRALLY LOCATED HOLE
head_height0.203 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length2.500 INCHES NOMINAL IN
thread_class2A A
NSN5330-00-197-9611
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114-4-2 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 7.195 INCHES MINIMUM AND 7.255 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
CENTER HOLE DIAMETER7.195 INCHES MINIMUM AND 7.255 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
622335Interchangeable
interchangeable cross-reference
interchangeable
622769Interchangeable
interchangeable cross-reference
interchangeable
SR6K5Interchangeable
interchangeable cross-reference
interchangeable
SR6K502Interchangeable
interchangeable cross-reference
interchangeable
PAMMS3KFS171AInterchangeable
interchangeable cross-reference
interchangeable
114-42Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114-4-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114-4-2?
114-4-2 is a FILTER ELEMENT,FLUID manufactured by InLine.
What parts can replace 114-4-2?
There are 24 known substitutes for 114-4-2: 622335, 622769, SR6K5 and 21 more. Substitute compatibility should be verified for your specific system.
Is 114-4-2 still available?
114-4-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114-4-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026