PartsTable
Technical Data Sheet
114-336 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 114-336 is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR FLOAT, current_type: DC, terminal_type: STUD, overall_length: 97.750 INCHES NOMINAL IN, voltage_rating: 10.0 VOLTS MINIMUM AND 12.0 VOLTS MAXIMUM, mounting_method: BRACKET(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-065-4477, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 114-336
NSN: 5998-00-065-4477
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR FLOAT
current_typeDC
terminal_typeSTUD
overall_length97.750 INCHES NOMINAL IN
voltage_rating10.0 VOLTS MINIMUM AND 12.0 VOLTS MAXIMUM
mounting_methodBRACKET(S)
pressure_rating0.000 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 400.000 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
actuation_methodFLOAT
terminal_quantity3
resistance_in_ohms7.500 PER INCH OF INDICATION
float_effective_travel87.000 INCHES NOMINAL IN
media_for_which_designedOIL OR WATER
NSN5998-00-065-4477
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 114-336 MFR 114-336
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH5.790 INCHES NOMINAL IN
OVERALL HEIGHT0.660 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITOR 5, CONNECTOR 2, DIODE 31, PRINTED WIRING BOARD 1, RESISTOR 34, TRANSISTOR 21, PAD,TRANSISTOR 21; MOUNTING CONFIGURATION: PLUG-IN MOUNTING
END ITEM IDENTIFICATIONCIRCUIT CARD ASSEMBLY
OVERALL WIDTH4.100 INCHES NOMINAL IN
OVERALL LENGTH5.790 INCHES NOMINAL IN
OVERALL HEIGHT0.660 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITOR 5, CONNECTOR 2, DIODE 31, PRINTED WIRING BOARD 1, RESISTOR 34, TRANSISTOR 21, PAD,TRANSISTOR 21; MOUNTING CONFIGURATION: PLUG-IN MOUNTING
END ITEM IDENTIFICATIONCIRCUIT CARD ASSEMBLY
OVERALL WIDTH4.100 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
11558Interchangeable
interchangeable cross-reference
interchangeable
211558Interchangeable
interchangeable cross-reference
interchangeable
BDM211558EAInterchangeable
interchangeable cross-reference
interchangeable
1407Interchangeable
Intel Pentium 1407 DC 2.80GHz 5MB
interchangeable
89-1407Interchangeable
interchangeable cross-reference
interchangeable
25643Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 114-336?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114-336?
114-336 is a 114-336. It is classified as a MRO (MRO_GENERAL).
What parts can replace 114-336?
There are 17 known substitutes for 114-336: 11558, 211558, BDM211558EA and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 114-336?
114-336 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-065-4477. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114-336