PartsTable
Technical Data Sheet
Download PDF

114-221 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

114-221: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, overall_height: 0.634 INCHES NOMINAL IN, outside_diameter: 1.124 INCHES NOMINAL IN, first_hole_spacing: 0.188 INCHES NOMINAL IN, first_hole_diameter: 0.420 INCHES NOMINAL IN, second_hole_spacing: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-059-6537, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114-221
NSN: 5340-00-059-6537
NIINs: 000596537, 013868216, 014528427
FSC: 5340 — Hardware, Commercial
CAGE: 06442 — MIRION TECHNOLOGIES (CANBERRA), INC. (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
overall_height0.634 INCHES NOMINAL IN
outside_diameter1.124 INCHES NOMINAL IN
first_hole_spacing0.188 INCHES NOMINAL IN
first_hole_diameter0.420 INCHES NOMINAL IN
second_hole_spacing0.500 INCHES NOMINAL IN
second_hole_diameter0.190 INCHES NOMINAL IN
material_document_and_classificationAMS 3303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-059-6537
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 114-221 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.323 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-17919,TYPE 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.307 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.218 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.367 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
LENGTH0.323 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-17919,TYPE 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.307 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
MATERIAL THICKNESS0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.218 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.093 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
5014-11Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
G302616-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
6009-6AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 114-221?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114-221?
114-221 is a CLIP,SPRING TENSION.
What parts can replace 114-221?
There are 3 known substitutes for 114-221: 5014-11, G302616-3, 6009-6A. Substitute compatibility should be verified for your specific system.
What is the NSN for 114-221?
114-221 is cataloged in the U.S. Government catalog under NSN 5340-00-059-6537. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114-221

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.