PartsTable
Technical Data Sheet
Download PDF

113910 — CIRCUIT CARD ASSEMBLY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

113910: CIRCUIT CARD ASSEMBLY.

The CIRCUIT CARD ASSEMBLY is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON LOCKING INSERT, nut_style: CLINCH, nut_height: 0.204 INCHES NOMINAL IN, pilot_length: 0.063 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-208-4155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
113910
NSN: 5310-00-208-4155
NIINs: 002084155, 007890912, 010093337
FSC: 5310 — Nuts and Washers
CAGE: 88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON LOCKING INSERT
nut_styleCLINCH
nut_height0.204 INCHES NOMINAL IN
pilot_length0.063 INCHES NOMINAL IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.189 INCHES NOMINAL IN
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
features_providedELECTROSTATIC SENSITIVE
width_across_flats0.250 INCHES NOMINAL IN
nominal_thread_size0.112 INCHES IN
NSN5310-00-208-4155
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 113910 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
PILOT DIAMETER: 0.189 INCHES NOMINAL IN
•
PILOT LENGTH: 0.063 INCHES NOMINAL IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
NUT HEIGHT: 0.204 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
PILOT DIAMETER0.189 INCHES NOMINAL IN
PILOT LENGTH0.063 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.204 INCHES NOMINAL IN
NUT STYLECLINCH
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 2
69NC1-40Reference document
Same NSN cross-reference
Reference document — Secondary reference
ANN5Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 113910?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 113910?
113910 is a CIRCUIT CARD ASSEMBLY.
What parts can replace 113910?
There are 2 known substitutes for 113910: 69NC1-40, ANN5. Substitute compatibility should be verified for your specific system.
What is the NSN for 113910?
113910 is cataloged in the U.S. Government catalog under NSN 5310-00-208-4155. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 113910

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.